LT1220CN8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | DIP |
| Number of Pins | 8 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 8mA |
| Slew Rate | 250 V/μs |
| Common Mode Rejection Ratio | 92 dB |
| Current - Input Bias | 100nA |
| Output Current per Channel | 26mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 45MHz |
| Gain Bandwidth Product | 45MHz |
| Voltage Gain | 93.98dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 2.5V |
| Nominal Gain Bandwidth Product | 45MHz |
| Number of Amplifiers | 1 |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1220CN8#PBF Overview
In the package, you will find a DIP-case to contain the op amp ic. There are 8 pins on this chip. Op amp rates 500μV as input offset voltage. It is possible to operate this buffer amplifier from a supply current of 8mA . There should be no change in the voltage gain at 93.98dB. On this instrumentation amplifier, there are 1 circuits that are connected together. There are 1 channels on the operational amplifiers. It should not lower than 0°C to operate buffer amplifier. At temperatures greater than 70°C, Instrumentation amplifier should not be used. There are a total of 1 elements in this linear amplifier. I would like to point out that this electrical component is capable of working from a voltage below 36V as far as the power supply is concerned. To keep the buffer amps' supply voltage higher than 5V. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 18V volts. There are 1 amplifiers on the op amp.
LT1220CN8#PBF Features
93.98dB voltage gain
LT1220CN8#PBF Applications
There are a lot of Analog Devices, Inc. LT1220CN8#PBF Instrumentational OP Amps applications.
- Power control
- Radiation thermometry transducers
- Ultrasound transducers
- Vehicle electronics
- Multiplication circuits
- Medical imaging
- Tablets
- High gain DC amplifier
- High/low-pass filter circuit
- Switching amplifier