LM393PT
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 625mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LM393 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 1mA |
| Power Dissipation | 625mW |
| Output Current | 18mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 100pA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Natural Thermal Resistance | 120 °C/W |
| Current - Output (Typ) | 18mA @ 5V |
| Length | 4.4mm |
| Width | 3mm |
LM393PT Overview
A convenient packaging is provided in the form of 8-TSSOP (0.173, 4.40mm Width) .This comparator is of the CMOS, DTL, ECL, MOS, Open-Collector, TTL output type.Ready for shipping in Tape & Reel (TR) package.As you can see, the comparator has8 terminals.The component belongs to the Comparator family of electrical components.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.In general, the chip type can be classified as General Purpose .Electronic comparator has a total of 2 elements.The device is equipped with 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.The comparator consists of 8 pins.You may wish to search LM393 for more solutions that address your specific needs.There is a quiescent current of 2.5mA in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal use of the device should require a nominal supply current of 1mA .A current supply greater than 1mA may cause the comparator to malfunction.Electronic comparator is possible to input a maximum of 250nA current into the device.Based on the voltage formula, the voltage gain of the part is 106.02dB .
LM393PT Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393PT Applications
There are a lot of STMicroelectronics LM393PT linear comparators applications.
- Lithium ion battery monitoring
- Battery-Powered Electronics
- Infotainment & cluster
- Point of load regulators
- Current and voltage sensing
- Security Detection Systems
- Body Control Modules
- Wide Range VCO; MOS Clock Timers
- Zero-Crossing Detectors
- Power management