LM358D
| Parameters | |
|---|---|
| Factory Lead Time | 25 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 4.535924g |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LM358 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Channels | 2 |
| Operating Supply Current | 700μA |
| Nominal Supply Current | 1.2mA |
| Output Current | 40mA |
| Min Input Voltage | 0V |
| Slew Rate | 0.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 20nA |
| Max Input Voltage | 28.5V |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 1.1MHz |
| Unity Gain BW-Nom | 1100 kHz |
| Voltage Gain | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Bias Current-Max (IIB) @25C | 0.15μA |
| Dual Supply Voltage | 9V |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M358D Description
The LM358D is made up of two independent, high-gain, internally frequency-compensated op-amps that are specifically designed to work over a wide variety of voltages from a single power source. The magnitude of the power supply voltage has no bearing on the low-power supply drain.
Transducer amplifiers, DC gain blocks, and all traditional op-amp circuits are among the applications that may now be implemented more simply in single power supply systems. These circuits, for example, can be powered directly from the 5 V supply used in logic systems, and will easily provide the essential interface electronics without the need for additional power.
Even though just a single power source is used, the input common-mode voltage range includes ground, and the output voltage can also swing to ground in linear mode.
LM358D Features
? Frequency compensation implemented internally
? Large DC voltage gain: 100 dB
? Wide bandwidth (unity gain): 1.1 MHz (temperature compensated)
? Very low supply current per channel essentially independent of supply voltage
? Low input bias current: 20 nA (temperature compensated)
? Low input offset voltage: 2 mV
? Low input offset current: 2 nA
? Input common-mode voltage range includes negative rails
? Differential input voltage range equal to the power supply voltage
? Large output voltage swing 0 V to (VCC+ - 1.5 V)
LM358D Applications
? Two internally compensated op amps
? Removes the necessity of dual supplies
? Permits direct sensing close to GND & VOUT
? Well-suited with all methods of logic
? Power drains appropriate for the operation of the battery
The LM358D is made up of two independent, high-gain, internally frequency-compensated op-amps that are specifically designed to work over a wide variety of voltages from a single power source. The magnitude of the power supply voltage has no bearing on the low-power supply drain.
Transducer amplifiers, DC gain blocks, and all traditional op-amp circuits are among the applications that may now be implemented more simply in single power supply systems. These circuits, for example, can be powered directly from the 5 V supply used in logic systems, and will easily provide the essential interface electronics without the need for additional power.
Even though just a single power source is used, the input common-mode voltage range includes ground, and the output voltage can also swing to ground in linear mode.
LM358D Features
? Frequency compensation implemented internally
? Large DC voltage gain: 100 dB
? Wide bandwidth (unity gain): 1.1 MHz (temperature compensated)
? Very low supply current per channel essentially independent of supply voltage
? Low input bias current: 20 nA (temperature compensated)
? Low input offset voltage: 2 mV
? Low input offset current: 2 nA
? Input common-mode voltage range includes negative rails
? Differential input voltage range equal to the power supply voltage
? Large output voltage swing 0 V to (VCC+ - 1.5 V)
LM358D Applications
? Two internally compensated op amps
? Removes the necessity of dual supplies
? Permits direct sensing close to GND & VOUT
? Well-suited with all methods of logic
? Power drains appropriate for the operation of the battery