LM2903HD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LM2903 |
| Pin Count | 8 |
| Output Type | CMOS, DTL, ECL, MOS, Open-Collector, TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Power Dissipation | 710mW |
| Output Current | 16mA |
| Max Supply Current | 1mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
LM2903HD Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.The comparator has a type CMOS, DTL, ECL, MOS, Open-Collector, TTL output.This package has been designed with Tube .The comparator has a total of 8 terminals.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Electronic comparator can be classified as a General Purpose chip.Currently, it consists of only 2 elements.The device includes 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .A temperature setting of -40°C~150°C should be used for the operating temperature in order to prevent malfunctions.The comparator has a pin count of 8 .In case you are looking for more pin-to-pin solutions, you may want to search LM2903 .There is a quiescent current of 2.5mA in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normal operation of the device requires a nominal supply current of 1mA .The compartator could be damaged if the current supply exceeds 1mA .This device requires 5V power supplies to operate.You can input a maximum current of 250nA into this device.In accordance with the voltage formula, the part's voltage gain is 106.02dB .
LM2903HD Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~150°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM2903HD Applications
There are a lot of STMicroelectronics LM2903HD linear comparators applications.
- Set Top Boxes
- Handheld Instruments
- General-Purpose, Low-Voltage Applications
- Pulse, Squarewave, and Time Delay Generators
- Motor drives
- System control and monitoring
- DC/DC and AC/DC power supplies
- Analog front end
- Limit Comparators
- Battery-Powered Electronics