L9333MD
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L9333 |
| Pin Count | 20 |
| Output Voltage | 60V |
| Output Type | N-Channel |
| Max Output Current | 700mA |
| Supply Voltage-Max (Vsup) | 32V |
| Interface | On/Off |
| Nominal Supply Current | 50μA |
| Output Configuration | Low Side |
| Output Current | 5mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2 μs |
| Switch Type | General Purpose |
| Min Input Voltage | -14V |
| Max Input Voltage | 45V |
| Nominal Input Voltage | 45V |
| Turn-Off Delay Time | 3 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~32V |
| Fault Protection | Over Temperature |
| Number of Drivers | 4 |
| Turn On Time | 3.5 µs |
| Output Peak Current Limit-Nom | 0.015A |
| Rds On (Typ) | 1.7 Ω |
| Max Junction Temperature (Tj) | 150°C |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| On-State Resistance | 1.7Ohm |
| Height | 2.65mm |
| Length | 13mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 14 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Manufacturer Package Identifier | SO20-SO20MEC |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 1.7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BCD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
L9333MD Overview
Tube is the way it's packaged.There is a package for it in the 20-SOIC (0.295, 7.50mm Width) package.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The LED driving board operates at Not Required volts.The maximum output voltage of this LED driver is N-Channel volts.In terms of features, the LED driving board has Status Flag.The L9333 family contains this object.It has a total of 20 terminations.In order to operate, the 20 pins are used.It consists of 1 functions.The maximum output current drops to 700mA in order to meet the operation criteria.The lighting driver is mounted in the way of Surface Mount.20 pins are equipped with it.It has a resistance of 1.7Ohm.The output current is set to 5mA in this case.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.Vsup (maximum supply voltage) is set to 32V.The maximum input voltage is 45V volts.As far as input voltage goes, it has a minimum of -14V volts.A total of 4 drivers are included in this part.
L9333MD Features
Resistance of 1.7Ohm
L9333MD Applications
There are a lot of STMicroelectronics L9333MD Power Switches ICs applications.
- Wireless/Networking Cards
- USB Power Distribution
- Portable/Handheld Devices
- Notebook and Tablet Computers
- Portable Video Game Players
- Portable GPS
- Set-top-box
- Gaming
- Portable Music Players
- Wireless Headsets