L6207D
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Bootstrap Circuit |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 340mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, Stepper Motors, Voltage Regulators |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6207 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Output Voltage | 52V |
| Max Output Current | 5.6A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 2 |
| Interface | Logic |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Output Current | 2.8A |
| Output Current per Channel | 2.8A |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 2.8A |
| Voltage - Load | 8V~52V |
| Fault Protection | Current Limiting, Over Temperature, UVLO |
| Rds On (Typ) | 300m Ω |
| Motor Type | Brushed |
| Current - Peak Output | 5.6A |
| Load Type | Inductive |
| Height | 2.35mm |
| Length | 15.6mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6207D Overview
In this package, Tube is used.H bridge is provided in the 24-SOIC (0.295, 7.50mm Width) package for the sake of cost savings.Reliabilbridge drivery can be improved by increasing 8V~52V's supply voltage.H bridge circuit is mounted in the way of Surface Mount.-25°C~125°C TJ can work normally at motor driver H bridges operating temperature.H bridge motor driver can be used for a variety of purposes, including DC Motors, Stepper Motors, Voltage Regulators.In order to mount H gate on the PCB, Surface Mount is used.H gates specific characteristics also include Bootstrap Circuit.Transmission lines are terminated with 24 terminations with the H bridge that matches their characteristic impedance.It is used as a pronged contact as H bridge ic of a signal interface when 24 pins are used.Based on its base H bridge ic number of L6207, more closely related H bridge ics can be found.This H bridge operates with a voltage of 48V.STEPPER MOTOR CONTROLLER has been incorporated as H bridge circuit's analog IC type.During a specified ambient temperature, the power supply can supply the maximum load current 5.6A.A maximum current is reached by output when H-bridge reaches 5.6A.Currently, 2.8A current flows through the output and power supply pins.It is the 24 pins that enable this bridge driver to perform its specific functions.It is equipped with a 4 output.This H bridge motor driver falls under the subcategory of Motion Control Electronics.To ensure high efficiency, the operating supply voltage is maintained at 48V.The Hbridge emits a voltage of 52V.
L6207D Features
Available in 24-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : L6207
Subcategory: 5.6A
Number of Receivers: 48V
L6207D Applications
There are a lot of STMicroelectronics L6207D Full Bridge Drivers, Half-Bridge Drivers applications.
- Bipolar stepper motor
- Compact Blade Servers
- Non-V-Core
- High-Current DC-DC Point-of-Load Converters
- OA equipments
- DVD players
- CD players
- Voltage Regulators
- Industrial Automation
- PC peripherals