L5991D013TR
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L5991 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Voltage | 5.075V |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 10V~20V |
| Quiescent Current | 9mA |
| Control Features | Frequency Control, Soft Start, Sync |
| Topology | Boost, Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 70ns |
| Fall Time (Typ) | 35 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Voltage |
| Max Duty Cycle | 93 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 15V |
| Height | 1.6mm |
| Length | 10mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
L5991D013TR Overview
This ac to dc converter is embedded in package 16-SOIC (0.154, 3.90mm Width) .There is a AC/DC power converter of Tape & Reel (TR) available.There is a mounting point for this AC/DC converter in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.The AC DC converter utilizes a type SWITCHING CONTROLLER analog IC.As soon as the switching frequency reaches Up to 1MHz , the circuit is closed.Within the range of 10V~20V supply voltage (Vcc/Vdd), it can be used.Total terminations are 16 .The ac/dc converter has a total of 16 pins.There are 16 pins in the ac-dc converter.It are possible to mount thare ac dc converters by Surface Mount .The L5991 family allows you to search for similar acdc converters.There are 1 outputs to run.Currently, the output current is set to 1.5A .Its output voltage is5.075V .AC to DC converter reaches high efficiency when operated at a frequency of 1MHz .SVHC for REACH can be found in the standard No SVHC .AC to DC converter consumes quiescent current at 9mA .
L5991D013TR Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at Up to 1MHz
With 16 pins
Output Current at 1.5A
L5991D013TR Applications
There are a lot of STMicroelectronics L5991D013TR AC DC Converters applications.
- Adapters for Handheld Electronics
- Chargers for cell/cordless phones
- Battery Chargers
- Standby power supplies for IR
- Standby Power for General Off-Line Applications
- Switching AC-DC Adapter
- Off--line Battery Charger
- Networking
- Standby Power Supplies
- Smartphones