IPS031S
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | D2PAK |
| Number of Pins | 3 |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 45mOhm |
| Terminal Finish | TIN LEAD |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.54mm |
| Current Rating | 2.8A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G2 |
| Qualification Status | Not Qualified |
| Max Output Current | 2.8A |
| Operating Supply Voltage | 35V |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 4V |
| Power Dissipation-Max | 1.56W |
| Nominal Supply Current | 10mA |
| Output Configuration | Low Side |
| Power Dissipation | 1.56W |
| Current - Output | 2.2A |
| Output Current per Channel | 2.8A |
| Rise Time | 1μs |
| Fall Time (Typ) | 1.5 μs |
| Driver Number of Bits | 1 |
| Fault Protection | Over Temperature |
| Turn On Time | 0.6 µs |
| Output Peak Current Limit-Nom | 10A |
| Drain to Source Resistance | 60mOhm |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.69mm |
| Width | 8.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
IPS031S Overview
There is a D2PAK package that includes this.At present, 1 channels are available.Hot-swappable device comes in the shape of a Bulk.Total terminations are 2.In this case, the device is located at terminal SINGLE.The device has a total of 4 pins.High efficiency can be achieved with a voltage supply of 14V.In order to operate, 3 pins are used.There is nothing else in Peripheral Drivers but this gadget.Hot-swappable device is posHot-swappable deviceioned in the direction of Surface Mount.In order to ensure stable operation, a maximum operating temperature of 150°C°C must be set.Maintaining reliability requires a minimum working temperature of -40°C degrees Celsius.6VV is the maximum supply voltage that it can handle.Hot Swap works wHot Swaph as low a voltage as possible, such as 4VV.This results in a maximum output current of 2.8A, which meets the operation criteria.Resistance to 45mOhm is present in the device.
IPS031S Features
The terminal position of 4
IPS031S Applications
There are a lot of International Rectifier IPS031S hot swap controllers applications.
- Power supply hotswap & inrush control
- Telecommunications
- USB interface
- Thermal limitation
- PC board hot swap insertion and removal
- Current monitor output
- Distributed power systems
- Active current limit
- Redundant-array-of-independent-disk (RAID) storage
- Circuit breakers for electronic circuits