IPS031
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | TO-220-3 |
| Number of Pins | 3 |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 3 |
| Max Output Current | 3.1A |
| Operating Supply Voltage | 35V |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 1 |
| Interface | On/Off |
| Power Dissipation-Max | 2W |
| Nominal Supply Current | 10mA |
| Output Configuration | Low Side |
| Power Dissipation | 2W |
| Current - Output | 2.8A |
| Output Current per Channel | 3.1A |
| Driver Number of Bits | 1 |
| Fault Protection | Over Temperature |
| Turn On Time | 0.6 µs |
| Output Peak Current Limit-Nom | 10A |
| Drain to Source Resistance | 60mOhm |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height | 9.02mm |
| Length | 10.67mm |
| Width | 4.83mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
IPS031 Overview
It's included in the TO-220-3 package.In the current state, 1 channels are accessible.The package resembles a Bulk.There are 3 terminations in total.In this case, the device is located at terminal SINGLE.In total, it has 3 pins.A supply voltage of 14V can result in high efficiency.3 pins are used in operation.As far as Peripheral Drivers is concerned, this gadget is self-contained.Through Hole directs its position.In order to ensure stable operation, a maximum operating temperature of 150°C°C must be set.Hot-swappable device works at a minimum temperature of -40°C degrees Celsius to maintain reliabilHot-swappable devicey.Consequently, 3.1A is the maximum output current that can be achieved to meet the operation criteria.Resistance to 60mOhm is present in the device.
IPS031 Features
The terminal position of 3
IPS031 Applications
There are a lot of International Rectifier IPS031 hot swap controllers applications.
- Hard drive
- Datacom
- Storage network
- Remote access server
- Active current limit
- Redundant negative voltage supplies
- Undervoltage protection
- Microcontrollers
- CompactPCI
- Automatic restart after load failure