IH5049CWE
| Parameters | |
|---|---|
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DPST |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 75Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| On-state Resistance Match-Nom | 8Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 600ns, 300ns (Typ) |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 8 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 600ns |
| Switch-off Time-Max | 300ns |
| Normal Position | NO |
| Voltage - Supply, Dual (V±) | ±4.5V~20V |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 75Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | IH5049 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5+-15V |
IH5049CWE Overview
As the electronic part is packed in 16-SOIC (0.295, 7.50mm Width), international shipping is convenient. Advanced packaging method Tube is used to provide high reliability. This analog switch is mounted in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around 0°C~70°C TA. Total terminations are 16. A electrical component with 2 channels is capable of high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. This electronic part can be found in the 16 series. Based on SPST - NO switching circuits, these analog multiplexers work. There are 2 circuits in this switch device. Try searching for IH5049 variants of the analog switch ic. Internally, this switch multiplexer has a resistance of 75Ohm. It is a typical Multiplexer or Switches analog multiplexer. Integrated with DPST analog IC. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer.
IH5049CWE Features
2 Channels
Switch Circuit: SPST - NO
IH5049CWE Applications
There are a lot of Maxim Integrated IH5049CWE Analog Switches & Multiplexers ICs applications.
- SONET
- Voice over IP/DSL – Integrated Access Devices, Smart
- PDAs
- PBX interfaces
- Cable Modem
- Ultrasound
- PDH Multiplexers
- DSUs
- Communications systems
- Central office