HI3-0303-5
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | HI-303 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| JESD-30 Code | R-PDIP-T14 |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Input Voltage (Min) | -15V |
| Input Voltage (Max) | 15V |
| Voltage - Supply, Single/Dual (±) | 5V~34V ±5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 50Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 16pF 14pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 300ns, 250ns |
| Charge Injection | 30pC |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Normal Position | NO/NC |
| Height Seated (Max) | 5.33mm |
| Length | 19.17mm |
| RoHS Status | Non-RoHS Compliant |
HI3-0303-5 Overview
The electrical component comes in 14-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tube. A switch device like this is mounted in Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Around 0°C~75°C TA is the extended operating temperature. Totally, there are 14 terminations. The electronic part provides high-quality output because it has 1 channels. If the voltage supply is 15V volts, the electrical component should be turned on and run. Into the electrical component body are injected 14 pins. A SPDT switching circuit is used to build these analog multiplexers. Circuits number 2 make up this analogue multiplexer. Try searching for HI-303 variants of the analog switch ic. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.
HI3-0303-5 Features
1 Channels
Switch Circuit: SPDT
HI3-0303-5 Applications
There are a lot of Renesas Electronics America Inc. HI3-0303-5 Analog Switches & Multiplexers ICs applications.
- Imaging
- Ultrasound
- SDH
- Audio and video signal routing
- Digital Cross-Connects
- CSU
- PCMCIA cards
- Multiplexers
- Cable Modem
- USB 1.1 signal switching circuits