HEF4066BT,653
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | HEF4066B |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 90MHz |
| On-State Resistance (Max) | 155Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 7.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NO |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -50dB @ 1MHz |
| Switch-on Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 3V~15V |
| Drain to Source Resistance | 175Ohm |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 4 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
HEF4066BT,653 Overview
The electronic component is convenient to ship overseas because it is packed in a 14-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. In total, there have been 14 terminations. By its 1 channels, the electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. A total of 14 pins are injected into the electrical part body. The analog switch ics are built using SPST - NO switching circuits. A 4 circuit is present in this switch device. Try searching for HEF4066B variants of the analog switch ic. The functions of 14 pins can be found in the datasheets. A voltage of 3V~15V is required to drain this analog switch from a single voltage supply. The Drain to Source resistance of this electronic component is 175Ohm.
HEF4066BT,653 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 90MHz
Drain-to-Source resistance: 175Ohm
HEF4066BT,653 Applications
There are a lot of Nexperia USA Inc. HEF4066BT,653 Analog Switches & Multiplexers ICs applications.
- Modems
- Central office
- Remote Powered Equipment
- Audio and video routing
- Optical Applications
- PCMCIA cards
- Cross Connects
- SDH
- High-Voltage
- Wireless Local Loop