HCF4094BEY
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.627801g |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 3V~20V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | HCF4094 |
| Function | Serial to Parallel |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 20V |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Propagation Delay | 840 ns |
| Turn On Delay Time | 840 ns |
| Logic Function | Latch, Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 3 |
| Height | 5.1mm |
| Length | 20mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
HCF4094BEY Overview
In package 16-DIP (0.300, 7.62mm), there is an embedded device. This chip has a total termination count of 16. Tube is the case in which it is packed. Voltage rating of the part is 5V. 1 elements make up this part. 16 pins are located on the device. As a general recommendation, mounting by Through Hole is recommended. There is a component mounted in the way of Through Hole on this board. The operating temperature ranges -55°C~125°C. There is a votage of 3V~20V provided with it. In this case, the electrical component belongs to the series 4000B. If you use the HCF4094 family, you can find parts that are similar. Please take note of the following additional aspects of this section: PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT. This part should have a minimum supply voltage (Vsup) of at least 3V. The device has 3 input lines. Ideally, the maximum supply voltage (Vsup) should not exceed 20V.
HCF4094BEY Features
With 16 pins
Mounted in Through Hole type.
Based on HCF4094 family
HCF4094BEY Applications
There are a lot of STMicroelectronics HCF4094BEY Shift Registers applications.
- Pulse Extenders
- Generate time delay toward digital circuits
- 8-bit data storage
- Delay Line
- store data in digital form
- 7-segment display control
- Flash Memory
- Pattern Recognizers
- Parallel to serial converter
- Sequence generator