FPF2495UCX
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 9-UFBGA, WLCSP |
| Number of Pins | 9 |
| Weight | 42mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | IntelliMAX™ |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Resistance | 105mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | FPF2495 |
| Number of Outputs | 1 |
| Max Output Current | 2A |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 2A |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.36 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 230 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Driver Number of Bits | 1 |
| Min Current Limit | 100mA |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Over Voltage, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 70m Ω |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 370μm |
| Length | 1.21mm |
| Width | 1.21mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
FPF2495UCX Overview
Tape & Reel (TR) is the way it's packaged.It's included in the 9-UFBGA, WLCSP package.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type it owns.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.There is a default setting of 1 for output.It uses a supply voltage of Not Required to operate.Slew Rate Controlled, Status Flag features are available on the lighting driver.It is a member of the FPF2495 family.A total of 9 terminations have been found in it.For operation, we use the 9 pins.There are 1 functions of the LED driver.This results in the maximum output current dropping to 2A to meet the operation criteria.With a supply voltage of 5V, high efficiency is possible.Surface Mount is mounted in the way.Currently, the LED driving board has a resistance of 105mOhm ohms.This electrical component can be found in the IntelliMAX? series.The output current is set to 1.5A in this case.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.This part is powered by 3/5V.In order to maximize efficiency, the supply voltage should be set to 5.5V.Voltage input is limited to 5.5V volts.As a minimum input voltage, it requires 2.5V volts.It requires a maximum current requirement of 100μA.
FPF2495UCX Features
Supplied from 5V
Resistance of 105mOhm
FPF2495UCX Applications
There are a lot of ON Semiconductor FPF2495UCX Power Switches ICs applications.
- HDD, SSD
- Various applications equipped with buttons
- Gaming
- USB Ports/Hubs
- Mobile Communication Devices
- Handheld Devices
- Hot Swaps
- USB Power Distribution
- Portable Music Players
- Notebook and Tablet Computers