EPM7256BUC169-10N
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 160 |
| Published | 1998 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 169 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 169 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.8/3.32.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 141 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Frequency (Max) | 188.7MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 100 |
| Number of Logic Blocks (LABs) | 16 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.55mm |
| Length | 11mm |
| Width | 11mm |
| RoHS Status | RoHS Compliant |
EPM7256BUC169-10N Overview
256 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The product is contained in a BGA package.The device is programmed with 141 I/Os.There is a 169terminations set on devices.This electrical part is wired with a terminal position of BOTTOM.An electrical supply voltage of 2.5V is used to power it.It is a part of the family [0].In this chip, the 169pins are programmed.This device can also display [0].As a building block for digital circuits, there are 5000gates.In order to store data, EEPROMis used.It is mounted by Surface Mount.160pins are included in its design.This device operates at a voltage of 3.6Vas its maximum supply voltage.The device is designed to operate with a minimal supply voltage of 3VV.A power supply of 1.8/3.32.5Vvolts is required to operate this device.There are 100 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. There is a maximum frequency of 125MHz.Operating temperatures should be higher than 0°C.It is recommended to keep the operating temperature below 70°C.The logic block consists of 16 l logic blocks (LABs).A maximum frequency of less than 188.7MHzis recommended.Types of programmable logic are divided into EE PLD.
EPM7256BUC169-10N Features
BGA package
141 I/Os
169 pin count
160 pins
1.8/3.32.5V power supplies
16 logic blocks (LABs)
EPM7256BUC169-10N Applications
There are a lot of Altera EPM7256BUC169-10N CPLDs applications.
- I/O expansion
- ROM patching
- DDC INTERFACE
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Parity generators
- White goods (Washing, Cold, Aircon ,...)
- Synchronous or asynchronous mode
- Digital designs
- Programmable polarity
- Digital multiplexers