EPM7256AETI144-7N
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 172.4MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 5000 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 16 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7256AETI144-7N Overview
256 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The product is contained in a TQFP package.As a result, it has 120 I/O ports programmed.There is a 144terminations set on devices.There is a QUADterminal position on the electrical part in question.It is powered by a voltage of 3.3V volts.It is a part of the family [0].A chip with 144pins is programmed.If you use this device, you will also find [0].A digital circuit can be constructed using 5000gates.In order to maintain high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].Surface Mountmounts this electronic component.The 144pins are designed into the board.In this case, the maximum supply voltage is 3.6V.The minimal supply voltage is 3V.A programmable I/O count of 36 has been recorded.The frequency that can be achieved is 166.67MHz.It is recommended that the operating temperature exceeds -40°C.Ideally, the operating temperature should be below 85°C.Its basic building block is composed of 16 logic blocks (LABs).If the maximal frequency is less than [0], it should be lower than that.Programmable logic types are divided into EE PLD.
EPM7256AETI144-7N Features
TQFP package
120 I/Os
144 pin count
144 pins
16 logic blocks (LABs)
EPM7256AETI144-7N Applications
There are a lot of Altera EPM7256AETI144-7N CPLDs applications.
- Auxiliary Power Supply Isolated and Non-isolated
- DMA control
- State machine control
- Handheld digital devices
- I/O expansion
- Programmable polarity
- Software-Driven Hardware Configuration
- TIMERS/COUNTERS
- Random logic replacement
- White goods (Washing, Cold, Aircon ,...)