EPM7128EQC100-15
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Frequency (Max) | 125MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 15 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 3.65mm |
| Length | 20mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7128EQC100-15 Overview
There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.In the PQFPpackage, you will find it.This device has 84 I/O ports programmed into it.It is programmed to terminate devices at [0].QUADis the terminal position of this electrical part.An electrical supply voltage of 5V is used to power it.It belongs to the family [0].The chip is programmed with 100 pins.This device also displays [0].2500gates are devices that serve as building blocks for digital circuits.For high efficiency, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.This electronic part is mounted in the way of Surface Mount.A total of 100pins are provided on this board.This device operates at a voltage of 5.25V when the maximum supply voltage is applied.Despite its minimal supply voltage of [0], it is capable of operating.A total of 84programmable I/Os are available.A frequency of 100MHzcan be achieved.It is recommended that the operating temperature exceeds 0°C.It is recommended to keep the operating temperature below 70°C.There are 8 logic blocks (LABs) in its basic building block.It is recommended that the maximum frequency is less than 0.A programmable logic type is categorized as EE PLD.
EPM7128EQC100-15 Features
PQFP package
84 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM7128EQC100-15 Applications
There are a lot of Altera EPM7128EQC100-15 CPLDs applications.
- Custom shift registers
- I/O expansion
- Custom state machines
- Programmable power management
- I2C BUS INTERFACE
- Storage Cards and Storage Racks
- USB Bus
- Software-driven hardware configuration
- Digital systems
- Software Configuration of Add-In Boards