EPM7128BTC100-7
| Parameters | |
|---|---|
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 166.67MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 243.9MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | 3A991 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
EPM7128BTC100-7 Overview
There are 128 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The product is contained in a TQFP package.There are 84 I/Os on the board.100terminations have been programmed into the device.There is a QUADterminal position on the electrical part in question.It is powered from a supply voltage of 2.5V.It belongs to the family [0].Bulkis the packaging method.100pins are programmed on the chip.If this device is used, you will also be able to find [0].It is possible to construct digital circuits using 2500gates, which are devices that serve as building blocks.It is recommended that data be stored in [0].This device is mounted by Surface Mount.The 100pins are designed into the board.There is a maximum supply voltage of 3.6V.Normally, it operates with a voltage of 3VV as its minimum supply voltage.A programmable I/O count of 84 has been recorded.It is possible to achieve a frequency of 166.67MHz.It is recommended that the operating temperature exceeds 0°C.Temperatures should not exceed 70°C.The logic block consists of 8 l logic blocks (LABs).It is recommended that the maximal frequency be less than 0.A programmable logic type is classified as EE PLD.
EPM7128BTC100-7 Features
TQFP package
84 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM7128BTC100-7 Applications
There are a lot of Altera EPM7128BTC100-7 CPLDs applications.
- ToR/Aggregation/Core Switch and Router
- Interface bridging
- Programmable polarity
- Handheld digital devices
- STANDARD SERIAL INTERFACE UART
- Battery operated portable devices
- Software-driven hardware configuration
- ON-CHIP OSCILLATOR CIRCUIT
- Page register
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management