EPM7128AETC100-7N
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 129.9MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 84 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Frequency (Max) | 192.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 84 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 7 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM7128AETC100-7N Overview
This network has 128macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The item is packaged with TQFP.As you can see, this device has 84 I/O ports programmed into it.The device is programmed with 100 terminations.This electrical part has a terminal position of QUADand is connected to the ground.Power is supplied by a voltage of 3.3V volts.There is a part included in Programmable Logic Devices.Chips are programmed with 100 pins.The device can also be used to find [0].A digital circuit can be constructed using 2500gates.A high level of efficiency can be achieved by maintaining the supply voltage at [0].It is adopted to store data in [0].Surface Mountis the mounting point of this electronic part.There are 100 pins embedded in the device.It operates at a maximum supply voltage of 3.6V volts.The minimal supply voltage is 3V.A programmable I/O count of 84 has been recorded.A frequency of 129.9MHzcan be achieved.There should be a temperature above 0°Cat the time of operation.A temperature below 70°Cshould be used as the operating temperature.Its basic building block is composed of 8 logic blocks (LABs).There should be a lower maximum frequency than 192.3MHz.A programmable logic type is classified as EE PLD.
EPM7128AETC100-7N Features
TQFP package
84 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
EPM7128AETC100-7N Applications
There are a lot of Altera EPM7128AETC100-7N CPLDs applications.
- Programmable power management
- Auxiliary Power Supply Isolated and Non-isolated
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Boolean function generators
- PULSE WIDTH MODULATION (PWM)
- DMA control
- Bootloaders for FPGAs
- Storage Cards and Storage Racks
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Multiple Clock Source Selection