EPM7096LC84-15
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 84 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 84 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 84 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Frequency (Max) | 125MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1800 |
| Number of Programmable I/O | 64 |
| Number of Logic Blocks (LABs) | 6 |
| Output Function | MACROCELL |
| Number of Macro Cells | 96 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 5.08mm |
| RoHS Status | RoHS Compliant |
EPM7096LC84-15 Overview
96 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.In the PLCCpackage, you will find it.As you can see, this device has 68 I/O ports programmed into it.Terminations of devices are set to [0].This electrical part has a terminal position of QUADand is connected to the ground.The device is powered by a voltage of 5V volts.This part is part of the family [0].The chip is programmed with 84 pins.This device also displays [0].In digital circuits, there are 1800gates, which act as a basic building block.High efficiency requires the supply voltage to be maintained at [0].It is adopted to store data in [0].In this case, it is mounted by Surface Mount.There are 84pins on it.With a maximum supply voltage of [0], it operates.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.In total, there are 64programmable I/Os.In this case, 100MHzis the frequency that can be achieved.Ideally, the operating temperature should be greater than 0°C.A temperature below 70°Cshould be used as the operating temperature.In its simplest form, it consists of 6 logic blocks (LABs).There should be a lower maximum frequency than 125MHz.A programmable logic type is classified as EE PLD.
EPM7096LC84-15 Features
PLCC package
68 I/Os
84 pin count
84 pins
6 logic blocks (LABs)
EPM7096LC84-15 Applications
There are a lot of Altera EPM7096LC84-15 CPLDs applications.
- Custom shift registers
- Cross-Matrix Switch
- Auxiliary Power Supply Isolated and Non-isolated
- Power Meter SMPS
- Pattern recognition
- STANDARD SERIAL INTERFACE UART
- PULSE WIDTH MODULATION (PWM)
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- ToR/Aggregation/Core Switch and Router
- White goods (Washing, Cold, Aircon ,...)