EPM7032AELC44-10
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 44 |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 3.3V |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 227.3MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 600 |
| Number of Programmable I/O | 36 |
| Number of Logic Blocks (LABs) | 2 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 4.57mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM7032AELC44-10 Overview
There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is part of the PLCC package.It is programmed with 36 I/Os.It is programmed to terminate devices at [0].Its terminal position is QUAD.It is powered by a voltage of 3.3V volts.There is a part included in Programmable Logic Devices.In this chip, the 44pins are programmed.As a building block for digital circuits, there are 600gates.For high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].Surface Mountis the mounting point of this electronic part.A total of 44pins are provided on this board.In this case, the maximum supply voltage is 3.6V.Despite its minimal supply voltage of [0], it is capable of operating.Programmable I/Os are counted up 36.In this case, 125MHzis the frequency that can be achieved.There should be a temperature above 0°Cat the time of operation.Ideally, the operating temperature should be below 70°C.There are 2 logic blocks (LABs) in its basic building block.The maximal frequency should be lower than 227.3MHz.A programmable logic type is categorized as EE PLD.
EPM7032AELC44-10 Features
PLCC package
36 I/Os
44 pin count
44 pins
2 logic blocks (LABs)
EPM7032AELC44-10 Applications
There are a lot of Altera EPM7032AELC44-10 CPLDs applications.
- Synchronous or asynchronous mode
- Wide Vin Industrial low power SMPS
- PLC analog input modules
- Battery operated portable devices
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Discrete logic functions
- I/O PORTS (MCU MODULE)
- Custom shift registers
- Digital systems
- Software Configuration of Add-In Boards