EPM570T144C3N
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Weight | 1.319103g |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 304MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 144 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.375V |
| Memory Size | 1kB |
| Operating Supply Current | 55mA |
| Number of I/O | 116 |
| Memory Type | FLASH |
| Propagation Delay | 5.4 ns |
| Turn On Delay Time | 5.4 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Logic Blocks (LABs) | 57 |
| Speed Grade | 3 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1.4mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
EPM570T144C3N Overview
A mobile phone network consists of 440macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).A TQFP package contains the item.As a result, it has 116 I/O ports programmed.Terminations of devices are set to [0].This electrical component has a terminal position of 0.A voltage of 2.5V is used as the power supply for this device.This part is in the family [0].It is recommended to package the chip by Bulk.It is programmed with 144 pins.The supply voltage should be maintained at 3.3V for high efficiency.It is recommended that data be stored in [0].Surface Mountis the mounting point of this electronic part.There are 144pins on it.In this case, the maximum supply voltage is 3.6V.Initially, it requires a voltage of 2.375Vas the minimum supply voltage.The frequency that can be achieved is 304MHz.It is recommended that the operating temperature be greater than 0°C.A temperature less than 85°Cshould be used for operation.Its basic building block is composed of 57 logic blocks (LABs).The fundamental building block consists of 570logic elements/cells.The maximal frequency should be lower than 304MHz.It is possible to store data and programs in the devices' 1kBmemory.
EPM570T144C3N Features
TQFP package
116 I/Os
144 pin count
144 pins
57 logic blocks (LABs)
EPM570T144C3N Applications
There are a lot of Altera EPM570T144C3N CPLDs applications.
- High speed graphics processing
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- ON-CHIP OSCILLATOR CIRCUIT
- Pattern recognition
- Digital designs
- Digital multiplexers
- Portable digital devices
- LED Lighting systems
- Software Configuration of Add-In Boards
- POWER-SAVING MODES