EPM3064ATC44-4
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 44 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 34 |
| Memory Type | EEPROM |
| Propagation Delay | 4.5 ns |
| Turn On Delay Time | 4.5 ns |
| Frequency (Max) | 222.2MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 34 |
| Number of Logic Blocks (LABs) | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
EPM3064ATC44-4 Overview
64 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is part of the TQFP package.In this case, there are 34 I/Os programmed.There are 44 terminations programmed into the device.Its terminal position is QUAD.A voltage of 3.3Vprovides power to the device.This part is part of the family [0].It is recommended that the chip be packaged by Bulk.It is programmed with 44 pins.Additionally, this device is capable of displaying [0].There are 1250 gates, which are devices that acts as a building block for digital circuits. If high efficiency is to be achieved, the supply voltage should be maintained at [0].Data is stored using [0].The electronic component is mounted by Surface Mount.44pins are included in its design.There is a maximum supply voltage of 3.6V.Despite its minimal supply voltage of [0], it is capable of operating.A total of 34Programmable I/Os are present.This can be achieved at a frequency of 250MHz.It is recommended that the operating temperature be higher than 0°C.There should be a temperature below 70°Cat the time of operation.There are 4 logic blocks (LABs) in its basic building block.It should be below 222.2MHzat the maximal frequency.There are several types of programmable logic that can be categorized as EE PLD.
EPM3064ATC44-4 Features
TQFP package
34 I/Os
44 pin count
44 pins
4 logic blocks (LABs)
EPM3064ATC44-4 Applications
There are a lot of Altera EPM3064ATC44-4 CPLDs applications.
- Power automation
- Page register
- Address decoding
- Multiple DIP Switch Replacement
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- D/T registers and latches
- Dedicated input registers
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Software Configuration of Add-In Boards
- Custom shift registers