EPM3064ATC100-10
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 66 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Frequency (Max) | 222.2MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 1250 |
| Number of Programmable I/O | 66 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.27mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
EPM3064ATC100-10 Overview
The mobile phone network has 64 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).There is a TQFP package containing it.There are 66 I/Os programmed in it.There is a 100terminations set on devices.This electrical component has a terminal position of 0.A voltage of 3.3Vprovides power to the device.There is a part included in Programmable Logic Devices.Bulkis the packaging method.Chips are programmed with 100 pins.This device also displays [0].The 1250gates serve as building blocks for digital circuits.A high level of efficiency can be achieved by maintaining the supply voltage at [0].For data storage, EEPROMis adopted.This device is mounted by Surface Mount.It is designed with 100 pins.With a maximum supply voltage of [0], it operates.The minimal supply voltage is 3V.A programmable I/O count of 66 has been recorded.This frequency can be achieved at 125MHz.Operating temperatures should be higher than 0°C.It is recommended that the operating temperature be lower than 70°C.In its simplest form, it consists of 4 logic blocks (LABs).It is recommended that the maximal frequency be less than 0.A programmable logic type is categorized as EE PLD.
EPM3064ATC100-10 Features
TQFP package
66 I/Os
100 pin count
100 pins
4 logic blocks (LABs)
EPM3064ATC100-10 Applications
There are a lot of Altera EPM3064ATC100-10 CPLDs applications.
- Programmable power management
- Custom shift registers
- Address decoders
- Power up sequencing
- Random logic replacement
- Boolean function generators
- Multiple DIP Switch Replacement
- State machine design
- Wide Vin Industrial low power SMPS
- Bootloaders for FPGAs