EO1804PPAS
| Parameters | |
|---|---|
| Factory Lead Time | 5 Weeks |
| Number of Pins | 4 |
| Housing Material | Brass |
| Operating Temperature | -20°C~60°C |
| Packaging | Bulk |
| Published | 2006 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Termination | Cable |
| Max Operating Temperature | 60°C |
| Min Operating Temperature | -20°C |
| Voltage - Supply | 10V~40V |
| Ingress Protection | IP67 |
| Frequency | 100Hz |
| Lead Length | 2m |
| Max Output Current | 200mA |
| Output Configuration | PNP |
| Cable Length | 78.74 2m |
| Output Current | 200mA |
| Max Voltage Rating (DC) | 40V |
| Turn On Delay Time | 5 ms |
| Response Time | 3.2ms, 5ms |
| Thread Size | M18 |
| Adjustment Type | Adjustable, 270° Turn Potentiometer |
| Sensing Distance | 15.748 (400mm) |
| Sensing Method | Reflective, Diffuse |
| Max Supply Voltage (DC) | 40V |
| Connection Method | Cable |
| Light Source | Infrared (880nm) |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
EO1804PPAS Overview
It is recommended to set the temperature of a photoelectric sensor to -20°C~60°C in order to ensure reliable operation. For these electronic components to function, a voltage of 10V~40V should be applied to a circuit or system. Photoelectric sensors should have a response time of 3.2ms, 5ms. Ensure reliability by operating the photoelectric sensor at -20°C degrees Celsius or lower. It is possible to operate the system reliably at temperatures up to 60°C. You've got to connect the 4 pins to the photoelectric sensor for it to work. In order for a photoelectric sensor to function, the output current should be 200mA. A photoelectric sensor can be damaged by the maximum DC voltage of 40V. Unlike most photoelectric sensors, this one operates at a very low voltage such as 0 volts. It comes in the package?of a Bulk. Photoelectric sensors can be used with a maximum output current of 200mA. Photoelectric sensors operate with a maximum voltage of 40V in DC circuits.
EO1804PPAS Features
Sensing Distance: 15.748 (400mm)
4 pins
Response Time: 3.2ms, 5ms
Operating Temperature: -20°C~60°C
Maximal Supply Voltage (DC): 40V
Minimal Supply Voltage (DC): 10V
Turn On Delay Time: 5 ms
EO1804PPAS Applications
There are a lot of Carlo Gavazzi Inc. EO1804PPAS Photoelectric Sensors applications.
- Contrast sensors
- Monitoring bigger areas for objects with light grids
- Mechanical engineering
- Luminescence sensors
- Passive infrared sensors
- detect objects
- Counting small objects
- Entrance and gate
- Logistics and materials handling
- Automotive industry