E3Z-LS61
| Parameters | |
|---|---|
| Ratings | IP67 |
| Factory Lead Time | 6 Weeks |
| Mount | Brackets |
| Number of Pins | 4 |
| Weight | 65g |
| Body Material | PBT |
| Operating Temperature | -25°C~55°C |
| Published | 2002 |
| Series | E3Z |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 12V~24V |
| Ingress Protection | IEC IP67 |
| Reach Compliance Code | unknown |
| Approval Agency | CE |
| Body Length or Diameter | 20mm |
| Body Breadth | 10.8 mm |
| Output Type | NPN |
| Termination Type | WIRE/CONNECTOR |
| Output Configuration | NPN - Dark-ON/Light-ON - Selectable |
| Output Current | 100mA |
| Response Time | 1ms |
| Adjustment Type | Five-Turn Endless Adjuster |
| Sensing Distance | 0.787 ~ 7.874 (20mm ~ 200mm) ADJ |
| Sensing Method | Reflective, Diffuse |
| Sensors/Transducers Type | LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE |
| Connection Method | Cable |
| Light Source | Red (680nm) |
| Measurement Range-Max | 200 mm |
| Measurement Range-Min | 20 mm |
| Height | 31mm |
| RoHS Status | RoHS Compliant |
E3Z-LS61 Overview
To make sure the photoelectric sensor works, set its temperature to zero. It's important that 12V~24V is applied to the circuit or system for these components to work. Photoelectric sensors are considered to have an optimal response time of 1ms. To make a photoelectric sensor work, 4 pins must be connected. Photoelectric sensors should have a current of 100mA at their output in order to function.
E3Z-LS61 Features
Sensing Distance: 0.787 ~ 7.874 (20mm ~ 200mm) ADJ
4 pins
Response Time: 1ms
Operating Temperature: -25°C~55°C
E3Z Series
E3Z-LS61 Applications
There are a lot of Omron Automation and Safety E3Z-LS61 Photoelectric Sensors applications.
- Passive infrared sensors
- Checking objects on production lines or conveyors
- Luminescence sensors
- Logistics and materials handling
- Automotive industry
- Mechanical engineering
- Monitoring bigger areas for objects with light grids
- Automatic doors
- Detecting colours
- Material handling