E3S-CT16
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Screw |
| Number of Pins | 3 |
| Housing Material | Zinc |
| Operating Temperature | -25°C~55°C |
| Published | 2001 |
| Series | E3S-C |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Connector |
| Voltage - Supply | 12V~24V |
| Ingress Protection | NEMA 1, 4X, 6P, 12, 13; IEC 144 IP67 |
| Reach Compliance Code | unknown |
| Operating Supply Voltage | 24V |
| Output Configuration | NPN/PNP - Dark-ON/Light-ON - Selectable |
| Turn On Delay Time | 1 ms |
| Adjustment Type | Adjustable, 3/4-Turn Potentiometer |
| Sensing Distance | 1181.102 (30m) |
| Sensing Method | Through-Beam |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Cable |
| Light Source | Infrared (880nm) |
| Min Supply Voltage (DC) | 10V |
| Height | 29.5mm |
| Length | 74mm |
| Width | 40.4mm |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3S-CT16 Overview
In order for the photoelectric sensor to work reliably, it should be set to -25°C~55°C degrees Celsius. Into a circuit or system, these electronic components must be given 12V~24V voltage. To make the photoelectric sensor work properly, 3 pins must be connected. There is a maximum voltage of 30V that can be applied to a photoelectric sensor in a DC circuit without damaging it. As low a voltage as possible, such as 0 volts, can be used for this photoelectric sensor. Photoelectric sensors should have their supply voltage set to 0.
E3S-CT16 Features
Sensing Distance: 1181.102 (30m)
3 pins
Operating Temperature: -25°C~55°C
E3S-C Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
Turn On Delay Time: 1 ms
E3S-CT16 Applications
There are a lot of Omron Automation and Safety E3S-CT16 Photoelectric Sensors applications.
- Passive infrared sensors
- Zone scanners
- Detecting colours
- Checking objects on production lines or conveyors
- Contrast sensors
- Entrance and gate
- Pharmaceutical industry
- Material handling
- Monitoring bigger areas for objects with light grids
- Mechanical engineering