E3S-AD66
| Parameters | |
|---|---|
| Factory Lead Time | 2 Weeks |
| Mount | Screw |
| Number of Pins | 3 |
| Housing Material | Polybutylene |
| Operating Temperature | -25°C~55°C |
| Published | 1998 |
| Series | E3S-A |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | NEMA 4X; IEC IP67 |
| Reach Compliance Code | unknown |
| Operating Supply Voltage | 24V |
| Output Configuration | NPN - Dark-ON/Light-ON - Selectable |
| Turn On Delay Time | 500 μs |
| Adjustment Type | Two-Turn Endless Adjuster with an Indicator |
| Sensing Distance | 7.874 (200mm) |
| Sensing Method | Reflective, Diffuse |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Red (700nm) |
| Min Supply Voltage (DC) | 10V |
| Height | 21mm |
| Length | 51.3mm |
| Width | 12mm |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3S-AD66 Overview
In order to work reliably, the photoelectric sensor should be set to -25°C~55°C. It is necessary to provide these electronic components with a voltage of 0 to make them work in a circuit or system. The photoelectric sensor must be connected to 3 pins in order to function properly. Photoelectric sensors can be damaged by a voltage of 30V in DC circuit. As low a voltage as possible can be applied to this photoelectric sensor, such as 10V. To get the best performance from your photoelectric sensor, set the supply voltage to 24V.
E3S-AD66 Features
Sensing Distance: 7.874 (200mm)
3 pins
Operating Temperature: -25°C~55°C
E3S-A Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
Turn On Delay Time: 500 μs
E3S-AD66 Applications
There are a lot of Omron Automation and Safety E3S-AD66 Photoelectric Sensors applications.
- Entrance and gate
- Pharmaceutical industry
- Counting small objects
- Detecting colours
- Checking objects on production lines or conveyors
- Automatic doors
- Luminescence sensors
- Zone scanners
- Measuring distance
- Mechanical engineering