E3FA-TP21
| Parameters | |
|---|---|
| Factory Lead Time | 3 Weeks |
| Mount | Through Hole |
| Housing Material | ABS |
| Operating Temperature | -25°C~55°C |
| Published | 2012 |
| Series | E3FA |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | IEC IP67, IP69K |
| Output Configuration | PNP - Dark-ON/Light-ON - Selectable |
| Output Current | 100mA |
| Response Time | 500μs |
| Adjustment Type | Single-Turn |
| Sensing Distance | 787.4 (20m) |
| Sensing Method | Reflective |
| Sensors/Transducers Type | LINEAR POSITION SENSOR,PHOTOELECTRIC,THROUGH BEAM |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Red LED |
| Min Supply Voltage (DC) | 10V |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3FA-TP21 Overview
You should set the photoelectric sensor's temperature to -25°C~55°C for reliable performance. For these electronic components to work, the voltage should be provided by 10V~30V. The ideal response time for a photoelectric sensor is 500μs. A photoelectric sensor must have an output current of 100mA. There is no damage to the photoelectric sensor when applied a voltage of 30V in a DC circuit. As low a voltage as possible, such as 10V, can be used by this photoelectric sensor.
E3FA-TP21 Features
Sensing Distance: 787.4 (20m)
Response Time: 500μs
Operating Temperature: -25°C~55°C
E3FA Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
E3FA-TP21 Applications
There are a lot of Omron Automation and Safety E3FA-TP21 Photoelectric Sensors applications.
- Detecting colours
- Luminescence sensors
- Material handling
- Counting small objects
- Monitoring bigger areas for objects with light grids
- Checking objects on production lines or conveyors
- Automatic doors
- Passive infrared sensors
- Zone scanners
- detect objects