E3F2-7B4-P1
| Parameters | |
|---|---|
| Number of Pins | 4 |
| Operating Temperature | -25°C~55°C |
| Published | 2002 |
| Series | E3F2 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 10V~30V |
| Ingress Protection | IEC IP67, IP69K |
| Reach Compliance Code | unknown |
| Operating Supply Voltage | 24V |
| Output Configuration | PNP - Dark-ON/Light-ON - Selectable |
| Turn On Delay Time | 2.5 ms |
| Adjustment Type | Fixed |
| Sensing Distance | 275.591 (7m) |
| Sensing Method | Through-Beam |
| Max Supply Voltage (DC) | 30V |
| Connection Method | Connector |
| Light Source | Infrared (850 - 880nm) |
| Min Supply Voltage (DC) | 10V |
| RoHS Status | RoHS Compliant |
| Ratings | IP67 |
E3F2-7B4-P1 Overview
Ensure reliable performance by setting the photoelectric sensor's temperature to -25°C~55°C. In order for these electronic components to function, the voltage should be set to 10V~30V within the circuit or system. 4 pins must be connected to the photoelectric sensor to make it work. The maximum voltage of 30V in DC circuit can be applied to the photoelectric sensor without damage. A photoelectric sensor such as this can operate at a voltage as low as possible, such as 0 volts. If you want the best performance, set the supply voltage to 24V.
E3F2-7B4-P1 Features
Sensing Distance: 275.591 (7m)
4 pins
Operating Temperature: -25°C~55°C
E3F2 Series
Maximal Supply Voltage (DC): 30V
Minimal Supply Voltage (DC): 10V
Turn On Delay Time: 2.5 ms
E3F2-7B4-P1 Applications
There are a lot of Omron Automation and Safety E3F2-7B4-P1 Photoelectric Sensors applications.
- Passive infrared sensors
- Detecting colours
- Logistics and materials handling
- Pharmaceutical industry
- Material handling
- Monitoring bigger areas for objects with light grids
- Mechanical engineering
- Entrance and gate
- Contrast sensors
- Measuring distance