DS90LV001TLD
| Parameters | |
|---|---|
| Propagation Delay | 2 ns |
| Turn On Delay Time | 2 ns |
| Logic Function | Buffer |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Input | CML, LVDS, LVPECL |
| Output Polarity | TRUE |
| Power Consumption | 155W |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Interface Standard | EIA-644-A; TIA-644-A |
| Data Rate (Max) | 800Mbps |
| Supply Voltage1-Nom | 3.3V |
| Out Swing-Min | 0.25 V |
| Delay Time | 1.4ns |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Buffer, ReDriver |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | LVDS |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 726mW |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS90LV001 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Operating Supply Current | 70mA |
| Nominal Supply Current | 70mA |
| Power Dissipation | 726mW |
| Max Supply Current | 70mA |
DS90LV001TLD Overview
For convenience, power buffer comes packaged in 8-WFDFN Exposed Pad.Currently, this power buffer is available for shipping in Tape & Reel (TR) packages.The Surface Mount universal mout is designed for easy adaptability.Typical Buffer, ReDriver type.There is no voltage involved in the operation of this op amp buffer.As a result, there is a CML, LVDS, LVPECL input that is enabled.To avoid malfunctioning, the operating temperature should be set to -40°C~85°C.The operational amplifier buffer is aimed at LVDS and other applications as well.You can also try searching with "DS90LV001" when you need specific pin-to-pin solutions for your special needs.The op amp buffer has 8 terminals that can be found along its length.During reflow, it reaches a peak temperature of 235.3.3V voltage enables the splitter to handle a wide range of demanding tasks.A Power buffer's pinout begins with its 8 pins.The op amp buffers have 8 pins.For mounting on PCBs or other boards, it has a Surface Mount.In the industry, other Line Driver or Receiverss play an important role, such as the power buffer.In order for this power buffer to operate, a voltage of 70mA must be applied.In order to operate normally, you need a voltage of 3.3V.Receiver uses 1-Bit technology.Power dissipation is 726mW at most for this splitter.Splitters should be powered by 70mA-volts under normal conditions.This is a 1 element interface repeater signal.
DS90LV001TLD Features
Mainly used in LVDS.
A standard Line Driver or Receivers.
1-Bit receiver.
DS90LV001TLD Applications
There are a lot of Texas Instruments DS90LV001TLD Signal Buffers, Repeaters, Splitters applications.
- Communications Switchers
- Backplane Interconnect
- Loopback
- Laptop Computers (for External Video Cards)
- DSLAMs
- Test Equipment
- SATA SSDs or HDDs
- Network Switches/Routers
- Medical
- Industrial Server