DG441DK
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-GDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | +-15V |
| Number of Channels | 1 |
| Number of Circuits | 8 |
| Voltage - Supply, Single/Dual (±) | 13V~36V ±7V~22V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 85Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 150nA |
| Channel Capacitance (CS(off), CD(off)) | 4pF |
| On-state Resistance Match-Nom | 4Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 250ns, 120ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -100dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 120ns |
| Normal Position | NC |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
DG441DK Overview
Presented in 16-CDIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. It is mounted in the position Through Hole. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operational temperature extended around -40°C~85°C TA. In total, 16 terminations have occurred. High-quality output is provided by the electronic component's 1 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. This electrical component is included in the 16 series of products. SPST - NC switching circuits are used in these analog switch ics. The circuits in this analogue multiplexer number 8. This switch device is a typical Multiplexer or Switches. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.
DG441DK Features
1 Channels
Switch Circuit: SPST - NC
DG441DK Applications
There are a lot of Maxim Integrated DG441DK Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- DVD-R
- Industrial
- Video signal routing
- PBX interfaces
- Low-Voltage
- Multiplexers
- Channelized and Unchannelized DS3 applications
- Audio and video routing
- SDH