CY74FCT821ATSOCG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 6 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 10 |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CY74FCT821ATSOCG4 Overview
The flip flop is packaged in a case of SOIC. In total, it contains 1 elements. It has been determined that there have been 24 terminations. A voltage of 5V provides power to the D latch. FCTis the family of this D flip flop. This electronic part is mounted in the way of Surface Mount. There are 24pins on it. A Positive Edgeclock edge trigger is used in this device. This part is included in Bus Driver/Transceiver. In light of its reliable performance, this T flip flop is well suited for TUBE. A power supply of 5Vis required to operate it. The D flip flop is embedded with 2ports. If high efficiency is desired, the supply voltage should be kept at 5V. -32mAis the output current at high level. There is no low level output current set at 64mA. A temperature below 85°Cshould be used for operation. The operating temperature should be higher than -40°C. Despite its minimal supply voltage of 4.75V, it is capable of operating. It is capable of supporting a maximum supply voltage of 5.25V. BUS DRIVERis used as the logic IC in this D flip flop. Currently, it is equipped with 1 functions . The D latch is equipped with 24 pins.
CY74FCT821ATSOCG4 Features
24 pins
5V power supplies
1 Functions
24 pin count
CY74FCT821ATSOCG4 Applications
There are a lot of Texas Instruments CY74FCT821ATSOCG4 Flip Flops applications.
- Data Synchronizers
- Matched Rise and Fall
- Synchronous counter
- Communications
- Frequency division
- Functionally equivalent to the MC10/100EL29
- Data transfer
- Bus hold
- Computing
- Supports Live Insertion