CY74FCT377ATSOCTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT377 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 7.2 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 7.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT377ATSOCTE4 Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). You can find it in the Tape & Reel (TR)package. It is configured with Non-Invertedas an output. Positive Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. A voltage of 4.75V~5.25Vis required for its operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. It belongs to the 74FCTseries of FPGAs. The element count is 1 . T flip flop consumes 200μA quiescent energy. Terminations are 20. The 74FCT377 family contains this object. The power source is powered by 5V. There is 5pF input capacitance for this T flip flop. It is a member of the FCTfamily of D flip flop. This electronic part is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. It has a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. The flip flop is designed with 8bits. It reaches the maximum supply voltage (Vsup) at 5.25V. A normal operating voltage (Vsup) should remain above 4.75V. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. The system runs on a power supply of 5V watts. With an output current of 64mA, it is possible to design the device in any way you want. Currently, there are 8 lines of input.
CY74FCT377ATSOCTE4 Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT377ATSOCTE4 Applications
There are a lot of Texas Instruments CY74FCT377ATSOCTE4 Flip Flops applications.
- Bounce elimination switch
- Counters
- Latch
- Common Clocks
- Memory
- Data transfer
- Divide a clock signal by 2 or 4
- Load Control
- Storage Registers
- Shift Registers