CY74FCT162374TPVCT
| Parameters | |
|---|---|
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Propagation Delay | 10 ns |
| Quiescent Current | 5μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 500μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Power Supply Current-Max (ICC) | 0.5mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT162374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
CY74FCT162374TPVCT Overview
The item is packaged in 48-BSSOP (0.295, 7.50mm Width)cases. It is included in the package Tape & Reel (TR). Currently, the output is configured to use Tri-State, Non-Inverted. This trigger uses the value Positive Edge. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. The operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. In FPGA terms, D flip flop is a type of 74FCTseries FPGA. In total, it contains 2 elements. There is a consumption of 500μAof quiescent energy. A total of 48terminations have been recorded. This D latch belongs to the family of 74FCT162374. The power supply voltage is 5V. JK flip flop input capacitance is 4.5pF farads. A device of this type belongs to the family of FCT. The electronic part is mounted in the way of Surface Mount. With its 48pins, it is designed to work with most electronic flip flops. This device has Positive Edgeas its clock edge trigger type. This RS flip flops is a part number FF/Latches. It is designed with 16bits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. A power supply of 5Vis required to operate it. A D flip flop with 2embedded ports is available. If high efficiency is desired, the supply voltage should be kept at 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. There are 3 output lines on it. It consumes a total of 5μA quiescent current at any given time.
CY74FCT162374TPVCT Features
Tape & Reel (TR) package
74FCT series
48 pins
16 Bits
5V power supplies
CY74FCT162374TPVCT Applications
There are a lot of Texas Instruments CY74FCT162374TPVCT Flip Flops applications.
- Bus hold
- High Performance Logic for test systems
- Cold spare funcion
- Buffered Clock
- Common Clocks
- Instrumentation
- Event Detectors
- Modulo – n – counter
- Consumer
- Safety Clamp