CY24293ZXIT
| Parameters | |
|---|---|
| Factory Lead Time | 5 Weeks |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Generators |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY24293 |
| Output | HCSL, LVDS |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Quiescent Current | 60mA |
| Frequency (Max) | 200MHz |
| Input | Clock, Crystal |
| Ratio - Input:Output | 1:3 |
| Primary Clock/Crystal Frequency-Nom | 25MHz |
| PLL | Yes |
| Differential - Input:Output | No/Yes |
| Divider/Multiplier | No/No |
| Duty Cycle | 50 % |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY24293ZXIT Overview
This clock IC is packaged using the Tape & Reel (TR) method. A Clock PLL is included with the 16-TSSOP (0.173, 4.40mm Width) package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. There are a total of 16 terminations in this file. To operate this time clock generator, 3.3V voltage should be applied. There is a Clock PLL called Clock, Crystal which is designed to be the input to this clock generator. There are 1 circuits implemented in order to achieve full performance from this electronic part. It provides a maximum frequency of 200MHz. The Surface Mount allows this electrical component to be easily installed on the panel. As long as there are 3V~3.6V supply voltages provided, clock generator ic should work. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. The frequency synthesizer in this product is compatible with all levels of HCSL, LVDS logic. This electronic component is usually classified as a Clock Generator, Fanout Distribution component. It is a 16-bit IC that is designed for microprocessors specifically. Related electrical parts can be found for the base part number CY24293. There is a 16 pin that is available on the digital clock generator. RF synthesizers can handle a voltage of 3.3V as the supply voltage. And basically, this clock generator is often classified as a kind of Clock Generators. The output frequency is magnified as high as possible with 2 signal outputs. At a frequency of 25MHz, the system can achieve high efficiency.
CY24293ZXIT Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY24293ZXIT Applications
There are a lot of Cypress Semiconductor Corp CY24293ZXIT Clock Generators applications.
- Radar
- 10 Gigabit Ethernet
- Skew suppression
- Precision auxiliary angle deflection measurement
- Antenna automatic tracking
- FPGA and processor clocks
- Quenching?
- Signal demodulation
- Tracking filters
- High-speed communication applications