CY22395FXI
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Clock Generators |
| Voltage - Supply | 2.375V~3.465V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY22395 |
| Output | CMOS, LVCMOS |
| Pin Count | 16 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Nominal Supply Current | 50mA |
| Frequency (Max) | 133MHz 166MHz |
| Input | LVTTL, Crystal |
| Ratio - Input:Output | 1:5 |
| Primary Clock/Crystal Frequency-Nom | 150MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY22395FXI Overview
Tube-method packaging is used for clock ICs. Embedded in the 16-TSSOP (0.173, 4.40mm Width) package is this Clock PLL. This clock generator will sustain a maximum temperature of 260 when reflown. 16 terminations can be found in frequency generators. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. LVTTL, Crystal is designed as this clock generator's input. Using 1 circuits, the electronic part's full performance can be accessed. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 133MHz 166MHz. With the Surface Mount, it is easy to install this electric component on the panel. Clock PLL works with 2.375V~3.465V supply voltage provided. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. It's compatible with CMOS, LVCMOS logic levels. It has been classified as a Clock Generator, Fanout Distribution electronic part, which means that it is a semiconductor. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. You can find related electrical components to the base part number CY22395. There is a 16 pin that is available on the frequency synthesizers. In terms of the supply voltage, PLL clock can handle 3.3V volts. Clock Generators-type frequency generators are usually classified as this type. 5 signal outputs enable clock PLL to magnify output frequency as high as possible. I have designed a clock PLL with 3 elements and low jitter performance.
CY22395FXI Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22395FXI Applications
There are a lot of Cypress Semiconductor Corp CY22395FXI Clock Generators applications.
- Electronic equipment
- Signal generator
- Laptops
- Sampling clocks for ADC and DAC
- Instrument
- Multi-function printers
- Automatic control
- Antenna automatic tracking
- Microwave radio
- Signal demodulation