CSNA111
| Parameters | |
|---|---|
| Factory Lead Time | 11 Weeks |
| Mount | PCB |
| Mounting Type | Through Hole |
| Package / Case | Module, Single Pass Through |
| Number of Pins | 3 |
| Housing Material | Polycarbonate |
| Operating Temperature | 0°C~70°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSN |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | ±15V |
| Current Rating | 70A |
| Frequency | DC~150kHz |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 10mA |
| Operating Supply Voltage | 15V |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Polarization | Bidirectional |
| Nominal Supply Current | 10mA |
| Max Supply Current | 10mA |
| Accuracy | ±0.5% |
| Response Time | 1μs |
| Coil Resistance | 90Ohm |
| Sensor Type | Hall Effect, Closed Loop |
| Linearity | ±1% |
| Max Supply Voltage (DC) | 15.75V |
| Min Supply Voltage (DC) | 14.25V |
| For Measuring | AC/DC |
| Current - Sensing | 70A |
| Length | 40.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
CSNA111 Overview
For safety reasons, the current sensors are packaged in Module, Single Pass Through packages. A protective Bulk is placed over these current sensors in order to prevent damage to the devices. These current sensors should provide a maximum current of 10mA. It is recommended that current sensors provide a current that is not greater than 10mA. In order for the current sensors to operate, the operating temperature must not be lower than 0°C. As a result, the maximum operating temperature should be set to 70°C for the current sensors. It has been designed for 70A current to be sensed by the current sensors. This current sensor features 3 pins. As long as the current sensors are operating, they could supply a voltage of 15V. The nominal current supplied by current sensors should be 10mA. These sensors should supply a voltage of at least 14.25V in a DC circuit. But in the DC circuit, the current sensors should not provide more voltage than 15.75V.
CSNA111 Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: 0°C~70°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Closed Loop
Supply Voltage: ±15V
Frequency: DC~150kHz
Sensing Current: 70A
Module, Single Pass Through Package
CSNA111 Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSNA111 Current Sensors applications.
- Home Automation
- Battery supplied applications
- Proving Switch
- Leakage Current Sensors
- Battery chargers and systems
- Mobile applications
- Motor and load control
- Industrial Monitoring and Control Systems
- Battery supplied applications
- Uninterruptable Power Supllies (UPS)