CSLA1DG
| Parameters | |
|---|---|
| Factory Lead Time | 26 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Module, Single Pass Through |
| Number of Pins | 3 |
| Operating Temperature | -25°C~85°C |
| Packaging | Bulk |
| Published | 1998 |
| Series | CSLA |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Voltage - Supply | 8V~16V |
| Current Rating | 19mA |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 19mA |
| Operating Supply Voltage | 16V |
| Polarity | Bidirectional |
| Number of Channels | 1 |
| Polarization | Bidirectional |
| Max Supply Current | 19mA |
| Response Time | 3μs |
| Sensor Type | Hall Effect, Open Loop |
| Sensitivity | 24.6mV/N |
| For Measuring | AC/DC |
| Current - Sensing | 120A |
| RoHS Status | RoHS Compliant |
CSLA1DG Overview
The current sensors are put into Module, Single Pass Through packages for safety protection. As a safety measure, the current sensors are packaged inside the Bulk to prevent damage to the devices. They should be capable of supplying a maximum current of 19mA. The current supplied by current sensors should not be higher than 19mA. The operating temperature must not be lower than -25°C to ensure these current sensors work. Current sensors should, however, be set to 85°C for their maximum operating temperature. The current for which the current sensors have been designed is 19mA. There are 3 pins in this current sensor. In operation, the current sensors could produce 16V.
CSLA1DG Features
Moisture Sensitivity Level: 1 (Unlimited)
Operating Temperature: -25°C~85°C
1 Channels
Mounting Type: Through Hole
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 8V~16V
Sensing Current: 120A
Module, Single Pass Through Package
CSLA1DG Applications
There are a lot of Honeywell Sensing and Productivity Solutions CSLA1DG Current Sensors applications.
- Battery chargers and systems
- Frequency, Voltage, and Solar Inverters
- Monitor Motor Operation
- Industrial Monitoring and Control Systems
- Overcurrent Detection
- AC variabel speed drives and servo motor drives
- Inverter and H-bridge current measurements
- Continuity
- Power factor correction
- Uninterruptible Power Supplies(UPS)