CD74HCT597M96G4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 56 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 84 ns |
| Family | HCT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HCT597M96G4 Overview
In package SOIC, there is an embedded device. It sums up to 16 where the chip's terminations add up. There is 5V operating supply voltage listed on the part. 1 elements make up this part. 16 pins are present on the device. It is recommended that the mount should be done by Surface Mount. Electronic components are categorized as HCT. This chip's operating supply voltage is reported as 5V. The following additional elements are important to note: SISO OPERATION ALSO AVAILABLE. There are 9 input lines available in the device. There is a possibility of delivering voltage at 5V. A total of 8 bits are present on an IC chip. 16 pins are on it. At temperatures below 125°C, it is recommended for use. It should not be less than -55°C when operating this device. A voltage of 5.5V is employed as the supply voltage. Voltages higher than 4.5V are used for this supply. There is a quiescent current of 8μA running through it.
CD74HCT597M96G4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
Quiescent Current at 8μA
CD74HCT597M96G4 Applications
There are a lot of Texas Instruments CD74HCT597M96G4 Shift Registers applications.
- Sequence generator
- Pseudo Random Pattern Generator
- temporary data storage
- ROM Chips
- Interconnectors
- Counter
- Data manipulation
- Pulse Extenders
- LED matrix control
- Dual-rank shift, hold, and bus applications