CD74HCT564E
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Additional Feature | BROADSIDE VERSION OF 534 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 50MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 35ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 53 ns |
| RoHS Status | Non-RoHS Compliant |
CD74HCT564E Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. You can find it in the Tubepackage. T flip flop uses Tri-State, Invertedas its output configuration. It is configured with a trigger that uses Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. A 4.5V~5.5Vsupply voltage is required for it to operate. The operating temperature is -55°C~125°C TA. D-Typedescribes this flip flop. FPGAs belonging to the 74HCTseries contain this type of chip. Its output frequency should not exceed 50MHz Hz. In total, there are 1 elements. T flip flop consumes 8μA quiescent energy. A total of 20 terminations have been made. An input voltage of 5Vpowers the D latch. This T flip flop has a capacitance of 10pF farads at the input. A device of this type belongs to the family of HCT. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Normally, the supply voltage (Vsup) should be kept above 4.5V. There are 2 ports embedded in the flip flops. Additionally, you may refer to the D latch's additional BROADSIDE VERSION OF 534.
CD74HCT564E Features
Tube package
74HCT series
CD74HCT564E Applications
There are a lot of Rochester Electronics, LLC CD74HCT564E Flip Flops applications.
- Registers
- Consumer
- Functionally equivalent to the MC10/100EL29
- Supports Live Insertion
- Dynamic threshold performance
- Buffered Clock
- Asynchronous counter
- Instrumentation
- Digital electronics systems
- Count Modes