CD74HCT4094MG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 43 ns |
| Turn On Delay Time | 43 ns |
| Family | HCT |
| Logic Function | Latch, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 10 |
| fmax-Min | 60 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HCT4094MG4 Overview
SOIC is the package in which the device is embedded. The number of the chip's terminations sums up to 16. Rail/Tube is the case in which it is packed. 5V is the part's operating supply voltage. 1 elements are present in this part. The device is equipped with 16 pins. Using Surface Mount as a mount point is recommended. In the HCT series, the electronic component belongs. It is noted that the operating supply voltage of this chip falls within the range 5V. There are also the following additional considerations in this section: PARALLEL OUTPUT IS LATCHED; SERIAL OUTPUT LATCHED WITH SHIFT CLOCK ALSO AVAILABLE. Voltage can be delivered at 5V by the device. A total of 8 bits are present on the IC chip. There are a total of 16 pins on it. The product should be used at temperatures below 125°C. In order to operate the device, the value should not fall below -55°C. Under 5.5V, this voltage is employed. The supply voltage is higher than 4.5V. There are 10 output lines to operate. There is a subcategory of it called Shift Registers.
CD74HCT4094MG4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 10 output lines
CD74HCT4094MG4 Applications
There are a lot of Texas Instruments CD74HCT4094MG4 Shift Registers applications.
- Data Processors
- Remote control holding register
- 7-segment display control
- Serial to parallel converter
- Output expansion
- Parallel to serial converter
- Serial-to-parallel data conversion
- 8-bit data storage
- Data manipulation
- Flash Memory