CD74HC595NSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 32 ns |
| Turn On Delay Time | 300 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC595NSRG4 Overview
As a result, SOP package contains the embedded device. 16 is the total number of terminations on the chip. It is used to pack in Tape and Reel case. There is 5V operating supply voltage listed on the part. 1 elements make up this part. Devices with 16 pins are available. As a general recommendation, mounting by Surface Mount is recommended. In the HC/UH series, the electronic component belongs. It's noted that the chip's operating supply voltage is in the range 5V. A total of 8 bits are present on an IC chip. The total number of pins is 16. It should be used below 125°C. It should not be lower than -55°C to operate this device. This supply voltage is employed under 6V. It is used at a higher voltage than 2V. Operating on 9 output lines is possible.
CD74HC595NSRG4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
CD74HC595NSRG4 Applications
There are a lot of Texas Instruments CD74HC595NSRG4 Shift Registers applications.
- Delay Line
- Interconnectors
- Data Processors
- Pattern Recognizers
- Pseudo Random Pattern Generator
- Parallel data
- 7-segment display control
- Parallel to serial converter
- temporary data storage
- Sequence generator