CD74HC595M96E4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 300 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC595M96E4 Overview
There is an embedded device in the package SOIC. 16 is the sum of the number of terminations in the chip. The case Tape and Reel contains it. There is 5V operating supply voltage listed on the part. The part consists of 1 elements. It has 16 pins. It is recommended to mount by Surface Mount in order to get the best results. Electronic components fall under the category of HC/UH. The operating supply voltage of this chip is noted to be within the range 5V. IC chips contain a total of 8 bits. This board has 16 pins in total. Using it below 125°C is recommended. For this device to work, it should not go below -55°C. A voltage of this type is employed under 6V. Voltages higher than 2V are used for this supply. A total of 9 output lines need to be operated.
CD74HC595M96E4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
CD74HC595M96E4 Applications
There are a lot of Texas Instruments CD74HC595M96E4 Shift Registers applications.
- Data Format Converters
- Remote control holding register
- Pulse Extenders
- Serial to parallel converter
- 7-segment display control
- ROM Chips
- store data in digital form
- LED matrix control
- Parallel to serial converter
- Pattern Recognizers