CD74HC595DWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 300 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC595DWE4 Overview
There is a SOIC package embedded with the device. There are 16 terminations on the chip. A Rail/Tube case is used to pack it. Voltage rating of the part is 5V. The part consists of 1 elements. It is equipped with a pin count of 16. Mounting by Surface Mount is recommended. There is an electronic component in the HC/UH. According to the specification, this chip's operating supply voltage falls within the range of 5V. There are 8 bits in the IC chip. The pin count is 16. Using it below 125°C is recommended. Ideally, it should not fall below -55°C. It is employed under the condition of 6V. Voltages higher than 2V are used for this supply. 9 output lines are available for operation.
CD74HC595DWE4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
CD74HC595DWE4 Applications
There are a lot of Texas Instruments CD74HC595DWE4 Shift Registers applications.
- Pattern Recognizers
- Data Processors
- Counter
- Remote control holding register
- Pseudo Random Pattern Generator
- Generate time delay toward digital circuits
- Pulse Extenders
- Flash Memory
- ROM Chips
- Interconnectors