CD74HC299MG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMMON I/O PINS; GATED OUTPUT CONTROL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 34 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 300 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | 7.8mA |
| Low Level Output Current | 7.8mA |
| Number of Input Lines | 10 |
| fmax-Min | 23 MHz |
| Max Frequency@Nom-Sup | 23000000Hz |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC299MG4 Overview
There is an embedded device in the package SOIC. It sums up to 20 where the chip's terminations add up. Parts with a 4.5V operating supply voltage are specified. 20 pins are available on the device. It is recommended that the mount should be done by Surface Mount. In this case, the electronic component belongs to the HC/UH. It's noted that the chip's operating supply voltage is in the range 5V. Additional aspects of this section include: COMMON I/O PINS; GATED OUTPUT CONTROL. A device with 10 input lines is available. IC chip bits total 8. This board has 20 pins in total. Temperatures below 125°C are recommended for use. Operation of this device requires a value greater than -55°C. It is employed under the condition of 6V. This supply voltage is employed higher than 2V. It runs with a quiescent current of 8μA. This device consists of 1 circuits in total.
CD74HC299MG4 Features
With 20 pins
Operate supply voltage at 5V
Quiescent Current at 8μA
CD74HC299MG4 Applications
There are a lot of Texas Instruments CD74HC299MG4 Shift Registers applications.
- data manipulation
- Cache memory in CPU
- data transfer
- Serial-to-parallel data conversion
- Serial-to-parallel data conversion
- 8-bit data storage
- 7-segment display control
- Dual-rank shift, hold, and bus applications
- Remote control holding register
- Flash Memory