CD74HC195NSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 6 |
| fmax-Min | 23 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC195NSRG4 Overview
There is a SOP package embedded with the device. 16 is the number of terminations on the chip. A Tape and Reel case holds it. Voltage rating of the part is 4.5V. The part consists of 1 elements. The device is equipped with 16 pins. It is recommended that the mount should be done by Surface Mount. This electronic component is classified as HC/UH. As noted, this chip operates within the range of 5V. Please take note of the following additional aspects of this section: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. There are 6 input lines available in the device. There are a total of 16 pins on it. The product should be used at temperatures below 125°C. This device should not be operated with a value lower than -55°C. A voltage of 6V is used to supply this voltage. It is used at a higher voltage than 2V.
CD74HC195NSRG4 Features
With 16 pins
Operate supply voltage at 5V
CD74HC195NSRG4 Applications
There are a lot of Texas Instruments CD74HC195NSRG4 Shift Registers applications.
- Counter
- Generate time delay toward digital circuits
- Interconnectors
- Data Processors
- Remote control holding register
- Flash Memory
- Serial to parallel converter
- Parallel data
- Data manipulation
- Sequence generator