CD74HC195ME4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 6 |
| fmax-Min | 23 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC195ME4 Overview
There is a SOIC package embedded with the device. 16 is the total number of terminations on the chip. A voltage of 4.5V is specified for the part's operating supply. A total of 1 elements can be found on this part. Devices with 16 pins are available. As a general recommendation, mounting by Surface Mount is recommended. In this case, the electronic component belongs to the HC/UH. The operating supply voltage of this chip is noted to be within the range 5V. Additionally, please note the following: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. The device has 6 input lines. The total number of pins is 16. It should be used below 125°C. It should not be less than -55°C when operating this device. It is used under the 6V supply voltage. It is important to note that this supply voltage is higher than 2V.
CD74HC195ME4 Features
With 16 pins
Operate supply voltage at 5V
CD74HC195ME4 Applications
There are a lot of Texas Instruments CD74HC195ME4 Shift Registers applications.
- Cache memory in CPU
- Data manipulation
- Output expansion
- Remote control holding register
- Serial to parallel converter
- Generate time delay toward digital circuits
- Pseudo Random Pattern Generator
- Counter
- Remote control holding register
- LED matrix control