CD74HC195EE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 30 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 37 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Input Lines | 6 |
| fmax-Min | 23 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC195EE4 Overview
In package PDIP, there is an embedded device. There are 16 terminations on the chip. A Rail/Tube case is used to pack it. This part has an operating supply voltage of 4.5V. On this part, there are 1 elements. 16 pins are present on the device. It is recommended that the mount should be done by Through Hole. Electronic components fall under the category of HC/UH. It is noted that this chip uses an operating supply voltage of 5V. Additional aspects of this section are as follows: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. This device has 6 input lines available. 16 pins are on it. A temperature below 125°C is recommended for its use. Operation of this device requires a value greater than -55°C. 6V is the supply voltage used. It is important to note that this supply voltage is higher than 2V. A quiescent current of 8μA is used to run the device.
CD74HC195EE4 Features
With 16 pins
Operate supply voltage at 5V
Quiescent Current at 8μA
CD74HC195EE4 Applications
There are a lot of Texas Instruments CD74HC195EE4 Shift Registers applications.
- Serial-to-parallel data conversion
- Pulse Extenders
- Pattern Recognizers
- Serial to parallel converter
- Parallel to serial converter
- Remote control holding register
- Serial-to-parallel data conversion
- 7-segment display control
- Remote control holding register
- Data manipulation