CD74AC534M96
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AC534 |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 125MHz |
| Propagation Delay | 141 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 2.8 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 11.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74AC534M96 Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. Package Cut Tape (CT)embeds it. T flip flop uses Tri-State, Invertedas its output configuration. This trigger uses the value Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A 1.5V~5.5Vsupply voltage is required for it to operate. In this case, the operating temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the 74ACseries of FPGAs. You should not exceed 125MHzin the output frequency of the device. D latch consists of 1 elements. The number of terminations is 20. Members of the 74AC534family make up this object. A voltage of 3.3V provides power to the D latch. Its input capacitance is 10pFfarads. A device of this type belongs to the family of AC. A part of the electronic system is mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device has the clock edge trigger type of Positive Edge. This part is included in FF/Latches. The design is based on 8bits. As soon as 5.5Vis reached, Vsup reaches its maximum value. Despite its superior flexibility, it relies on 8 circuits to achieve it. Considering the reliability of this T flip flop, it is well suited for TR. The D flip flop is embedded with 2ports. As a result of its output current of 24mA, it is very flexible in terms of design. The JK flip flop is with 3 output lines to operate. Quiescent current is consumed by the D latch in the amount of 8μA.
CD74AC534M96 Features
Cut Tape (CT) package
74AC series
20 pins
8 Bits
CD74AC534M96 Applications
There are a lot of Texas Instruments CD74AC534M96 Flip Flops applications.
- Control circuits
- Clock pulse
- Data storage
- Computers
- Shift Registers
- Registers
- Frequency division
- Load Control
- Balanced 24 mA output drivers
- ESCC